Shenzhen Bropool Industrial Co., Ltd. is a professional manufacturer on sauna room, hot tub and cold plunge
Tel:+86 18928448819 E-mail:info@bropool.com
Home> News> What are the construction steps for the sweat steaming room?wood fired hot tub heater>
2023-08-15 attribution:News
Suspend the ceiling, keep the top insulated, and install the ceiling cloth. The shapes of the ceiling are diverse, with Korean style sweat steaming rooms often using ceiling cloth, Enron sweat steaming rooms using nano quilts, and there are also other materials used. Korean style sweat steaming rooms can be painted with energy powder on the ceiling or without the ceiling, all painted on the wall, with the same effect. Mix the energy powder and putty powder of the ceiling and hang them on the gypsum board or wooden board of the ceiling. Pay attention to reserving light lines for the suspended ceiling. The ceiling cloth needs to be tightened, and one side can be fixed first, and then the other side can be fixed after tightening.
Wall bound wooden keel frame. Install the extruded board, embed it in the wooden keel, and keep the wall flat. Install gypsum board on the upper layer of the extruded board. The function of gypsum board is to level the wall and facilitate the fixation of other materials. Reflective film and electric film are installed on the wall, and electric film is installed on the wall and connected to the temperature controller. The built-in temperature sensor of the temperature controller is installed and tested for power on. Decorate the wall after confirming that there are no abnormalities. When the probe is not long enough, a copper core wire of the same thickness can be used to extend it. It is recommended to use a telephone signal wire.
The outer layer of the electric heating film is laid with non-woven fabric (non-woven fabric is used to hang energy powder, Enron nano sweat steam room is not laid), and bamboo curtains are installed with markings. When driving nails, do not nail them onto the heating area of the electric heating film and wires. When installing the backrest, do not nail it onto the heating area of the electric heating film and wires.
Read recommendations:
Cold Hydrotherapy Supply chain
What is the after-sales and warranty period for your sauna room products.Red light plate